
                KONICA MINOLTA PagePro 1380MF
                Readme: Supplementary Information
                          Version 1.24

============================================================
I.    INTRODUCTION

  This readme file contains special information related
  to the following items:

       - Application Notes
       - Copy
       - Scanner Driver
       - LinkMagic
       
  Please read before using the printer.
      
============================================================
II.   APPLICATION NOTES

   1. Word--When an existing Word document is printed in
      2up, numbers in footers may not be printed.
      In this case, print after the following procedures:

      i.  Go to "File/Page Setup" to open the Page
          Setup dialog box.
     ii.  Choose the Paper Size tab and change the selected
          Paper Size setting.
     iii. Change back to the previous Paper Size setting.
     iv.  Click the [OK] button to close the Page Setup dialog box. 

   2. MS Office--Scanning from "Insert" - "Picture" - "From
      Scanner or Camera" may not be performed properly.

===========================================================
III. Copying

   1. If a Legal-size document loaded into the ADF is being copied, pressing
      the [Stop] key while the document is being scanned may stop the machine
      while the document is being fed out. 
      (This problem does not occur with A4-size and Letter-size documents.)
 
===========================================================
IV. Scanner Driver

   1. Scan--When scanning at resolution of 150 dpi or less
      with "Image Type" set to "B/W", the image may be scanned at
      a smaller width.

   2. Some items or functions may not be available when operations are 
      performed using only the keyboard.  If an operation cannot be
      performed with the keyboard, perform the operation using the computer.

   3. When scanning using WIA, a white line may appear on the right side
      of the scanned image. If a white line appears on the right side of
      the scanned image, use the Twain driver.

   4. When scanning a document, the color of the scanned image may not be
      displayed properly.
      If the color is not proper, scan again.

==========================================================
V. LinkMagic

   1. The error messages may not appear on the LCD, 
      although the Error indication LED on the operation panel lights. 
      Error messages are displayed by pressing the [COPY Mode] or 
      [SCAN Mode] key.

   2. LinkMagic -   If any key on the MFP is pressed during a copy
      operation, the copy operation may not be performed correctly.

   3. The settings in "Copy" - "Configuration" - "Scanning setting"
      - "Advanced Setting" have priority over the settings in
      "Properties". 

   4. If any key on the MFP is pressed while a scan using "Scan to"
      is cancelled, the MFP may not operate properly.
      Reset the MFP by turning off its main switch, then turning it on again.

   5. If any key on the MFP is pressed while it is scanning, the MFP may
      not operate properly.

   6. If "Scan to application" in Linkmagic is used with Word 97, Excel 97,
      or PowerPoint 97, the scanned image may not be displayed correctly.

   7. Some items or functions may not be available when operations are 
      performed using only the keyboard.  If an operation cannot be performed with
      the keyboard, perform the operation using the computer.

   8. If LinkMagic is used to scan, and Twain is used to scan while "Saving" is
      displayed, the Twain scan may not be performed correctly.
    
      In this case, wait for "Saving" to disappear before performing the Twain scan.
  

   9. If LinkMagic is used to scan immediately after the driver is installed onto a
      computer running Windows 98SE or Me and the computer is not restarted, it
      may not be possible to use LinkMagic.
      After installing the driver onto a computer, be sure to restart the computer.

   10. When adding an application in LinkMagic, it is able to register though "Program 
      name on MFP LCD" remains blank. If this item is blank, there will be no indication 
      on the device LCD and it will affect operations.
      In this case, delete the application item and re-register.

   11. LinkMagic may not launch properly when it is launched from the icon in the 
      task bar just after launching Windows Vista. In this case, launch LinkMagic 
      after a while launching Windows Vista.

===========================================================

TRADEMARKS
KONICA MINOLTA is a trademark or a registered trademark
of KONICA MINOLTA HOLDINGS, INC.
PagePro is a trademark or a registered trademark of
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
All other trademarks are the property of their respective owners.

Copyright (c) 2011 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. 
All rights reserved.
